ARM-EVAC 500

Terms and Definitions

Process guides covering basic knowledge such as tip selection, tip preparation, land preparation, etc.

Addresses critical maintenance and troubleshooting steps to keep you and your equipment working at top performance and efficiency.

Our Highest Capacity Fume Extractor

The Arm-Evac 500 is perfectly suited for high performance, cellular manufacturing activities and provides fume extraction for up to 6 workstations. This unit boasts a high airflow motor pump with an effective three-stage filtration system. Incorporating microprocessor technology, an easy-to-read graphical LED filter condition monitor changes from green to yellow to red as the filter becomes clogged. The filter monitoring system self calibrates using a membrane keypad on the front panel and an audible alarm alerts the operator when a filter change is required.

Primary Features:

  • Can service up to 6 operating stations at once.
  • 3-Stage filtration system
  • High powered motor pump
  • Comes with lockable wheels
  • Filter Monitoring System self calibrates.
  • Compatible with an array of nozzles and accessories

Configurations:

*All Accessories are sold seperately*

2 Flex Arm 3 Flex Arm
(2) 3" Diam. ESD Safe Flex Arm (8886-0750-P1) (3) 3" Diam. ESD Safe Flex Arm (8886-0750-P1)
   
3 Flex Arm with Kit 4 Flex Arms with Kit
(3) 3" Diam. ESD Safe Flex Arm (8886-0750-P1) (4) 3" Diam. ESD Safe Flex Arm (8886-0750-P1)
(3) Extension Kit (8886-0745-P1) (4) Extension Kit (8886-0745-P1)
(3) Flow Controller (8886-0795-P1) (4) Flow Controller (8886-0795-P1)
   
3 Metal Plenum 4 Metal Plenum
(3) Metal Plenum (8886-0366-P1) (4) Metal Plenum (8886-0366-P1)
   
3 24" Flex Arms with Kit 3 36" Flex Arms with Kit
(3) 24" Flex Arm (8882-0415-P1) (3) 36" Flex Arm (8882-0435-P1)
(3) 50mm Extension Kit (8886-0553-P1) (3) 50mm Extension Kit (8886-0553-P1)
   
6 24" Flex Arms with Expansion Kit 6 36" Flex Arms with Expansion Kit
(6) 24" Flex Arm (8882-0415-P1) (6) 36" Flex Arm (8882-0435-P1)
(6) 50mm Extension Kit (8886-0553-P1) (6) 50mm Extension Kit (8886-0553-P1)
(2) Expansion Kit (8882-0692-P1) (2) Expansion Kit (8882-0692-P1)
   
120 V Part #: 8889-0505-P1
230 V Part #: 8889-0500-P1
  • Microprocessor controlled
  • Three-color LED filter condition gauge
  • Laser-trimmed electronic air flow sensor
  • Self-calibrates to specific arm configuration
  • Audible alarm alerts operator of filter change
  • Three-speed air flow adjustment
  • Intelligent air flow compensation " motor pump speed increases as filter becomes loaded
  • Includes pre-filter, HEPA Filter & Carbon Filter and power cord
  • UnitArm-Evac 500
    Arm-Evac 500E
  • Power Requirements115 VAC, 60 Hz
    230 VAC, 50 Hz
  • Size640mm (25")H x 400mm (15.75")W x 500mm (19.5")D
  • Sound Level*61 dBA
  • # of InletsThree 75mm (3")
  • Flow Rate*
  • General Purpose FilterSingle Inlet: 451 m3/h (266 cfm);
    Dual Inlet: 283 m3/h (167 cfm) per inlet
  • Cleanroom FilterSingle Inlet: 414 m3/h (244 cfm);
    Dual Inlet: 236 m3/h (140 cfm) per inlet
  • # of Collections Accessories Six 45mm (1.75") or 50mm (2")
    Three 65mm (2.5") or 75mm (3")
  • Microprocessor ControlYes
  • Maximum Duct Run5m (16') per inlet
  • System OptionsSilencer/Mobile Cart (P/N 8885-1255)
  • Standard Primary FilterGeneral Purpose Filter
  • Filtration OptionsGeneral Purpose Filter and Activated Carbon Filter
    Cleanroom Filter and Activated Carbon Filter

Manuals

Brochures

Process Guides