Terms and Definitions

R-SOI-10

SOIC Removal TT-65

TT-65 ThermoTweez
TT-65 ThermoTweez
SOICs
SOICs

1. Remove conformal coating (if any) and clean work of any contamination, oxides or residues. 

2. Set a tip temperature of 343°C (650°F) for lead-free or 316°C (600°F) for leaded alloys and adjust as necessary. 

3. Install SOIC Removal Tips into ThermoTweez® using Tip Tool. 

4. Place Fiber Tool or Sponge Tool from Tip Maintenance Station between tips to align parallel and tighten set screws using Tip Tool. (A)

5. Apply flux to all lead/land areas. (B)

6. Remove old solder from tips with Fiber Tool from Tip Maintenance Station. 

7. Thermal shock tips with damp Sponge Tool from Tip Maintenance Station. 

8. Tin bottom and inside edges of tips with solder. (C)

9. Lower tips over component and tweeze handpiece contacting ALL leads with tips. (D)

10. Confirm solder melt of ALL joints and lift component from PCB. (D) & (E)

11. Release component from tips by wiping on a heat resistant surface. 

12. Re-tin tips with solder and return ThermoTweez® to its Tip & Tool Stand. 

13. Prepare lands for component replacement. 

PACE SensaTemp® or Intelliheat® Power Supply 

TT-65 ThermoTweez® 

SOIC Removal Tips (See Chart on Back) 

Tip Tool 

Tip Maintenance Station 

Flux-cored Solder 

Flux 

Cleaner 

Product Image Dimensions Part Number
A=7.6mm (0.3") 1121-0512-P1
A=10.2mm (0.4") 1121-0514-P1
A=12.7mm (0.5") 1121-0473-P1
D=A=17.8mm (0.7") 1121-0416-P1
A = 20.3mm (0.8") 1121-0497-P1
A = 25.4mm (1.0") 1121-0448-P1