Terms and Definitions

I-SOI-03

SOIC Installation TD-100 Point to Point

TD-100 Handpiece
TD-100 Handpiece
SOICs
SOICs

1. Set a tip temperature of 343°C (650°F) for lead-free or 316°C (600°F) for leaded alloys and adjust as necessary.

2. Install chisel or conical tip into TD-100 using Tip Tool.

3. Position component ensuring proper lead-to-land alignment. Hold component in place using the HandiPik® or tweezers. (A)

4. Apply flux and tack solder opposing corner leads. (B)

5. Apply flux to ALL lead/land areas of the row to be soldered. (C)

6. Clean tip using Tip & Tool Stand sponge. (D)

7. Position chisel tip on lead. Apply solder to side of lead/ land area to form proper solder fillet. (E)

8. Repeat step 7 on remaining leads of component. Clean tip as necessary.

9. Re-tin tip with solder. Return TD-100 to its Tip & Tool Stand.

10. Clean, if required, and inspect.

PACE Intelliheat® Power Supply

TD-100 Thermo-Drive Soldering Iron

Chisel or Conical Tip (See Chart on Back)

HP-65 HandiPik®

Tip Tool

Tweezers

Flux-cored Solder

Flux

Cleaner